|
|
|
|
As you have noticed I am making my own track and points for a larger percentage of my layout. To assist me I have made a few jigs. Here are two jigs I use to cut the Balsa sleepers to length & width |
|
| This jig is simply a paper template to mark the width of the sleepers on the sheet of balsa. |  |
 |
 |
| This jig is used to cut the sleeper to the width I wish. I simply press down and move the knife back to me, then use the knife to push the sleeper out of the jig, push un the balsa and start again. | |
 |
 |
|
|
|
Page written & maintained by David Head. david@nmit.vic.edu.au